[ 0.000000] Linux version 5.15.0-cwt6-server (cwt@StarFive) (gcc (GCC) 12.2.1 20230111, GNU ld (GNU Binutils) 2.40) #1 SMP Wed Feb 1 23:30:07 +07 2023 [ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000 [ 0.000000] Machine model: StarFive VisionFive V2 [ 0.000000] earlycon: uart0 at MMIO32 0x0000000010000000 (options '115200') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000040200000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c010ffff] [ 0.000000] node 0: [mem 0x00000000c0110000-0x00000000c01fffff] [ 0.000000] node 0: [mem 0x00000000c0200000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000023fffffff] [ 0.000000] SBI specification v0.3 detected [ 0.000000] SBI implementation ID=0x1 Version=0x10000 [ 0.000000] SBI TIME extension detected [ 0.000000] SBI IPI extension detected [ 0.000000] SBI RFENCE extension detected [ 0.000000] SBI v0.2 HSM extension detected [ 0.000000] CPU with hartid=0 is not available [ 0.000000] CPU with hartid=0 is not available [ 0.000000] riscv: base ISA extensions acdfim [ 0.000000] riscv: ELF capabilities acdfim [ 0.000000] percpu: Embedded 27 pages/cpu s71976 r8192 d30424 u110592 [ 0.000000] pcpu-alloc: s71976 r8192 d30424 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063880 [ 0.000000] Kernel command line: root=/dev/mmcblk1p3 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 rootflags=defaults,discard=async,compress=lzo,user_subvol_rm_allowed,subvol=arch-minimal [ 0.000000] Unknown command line parameters: stmmaceth=chain_mode:1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 7559980K/8386560K available (10301K kernel code, 5842K rwdata, 6144K rodata, 2275K init, 446K bss, 302292K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU debug extended QS entry/exit. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] CPU with hartid=0 is not available [ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller [ 0.000000] riscv-intc: 64 local interrupts mapped [ 0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts. [ 0.000000] random: get_random_bytes called from start_kernel+0x568/0x774 with crng_init=0 [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns [ 0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns [ 0.008993] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.020313] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.031623] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.042944] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.054492] Console: colour dummy device 80x25 [ 0.060735] printk: console [tty0] enabled [ 0.065288] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000) [ 0.076509] pid_max: default: 32768 minimum: 301 [ 0.081659] LSM: Security Framework initializing [ 0.086780] landlock: Up and running. [ 0.090808] Yama: becoming mindful. [ 0.094729] AppArmor: AppArmor initialized [ 0.099262] LSM support for eBPF active [ 0.103668] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112176] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.122765] ASID allocator disabled [ 0.126708] rcu: Hierarchical SRCU implementation. [ 0.132274] EFI services will not be available. [ 0.137673] smp: Bringing up secondary CPUs ... [ 0.144467] smp: Brought up 1 node, 4 CPUs [ 0.151002] devtmpfs: initialized [ 0.162637] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.173499] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.196389] pinctrl core: initialized pinctrl subsystem [ 0.203410] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.210354] audit: initializing netlink subsys (disabled) [ 0.216492] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1 [ 0.225064] cpuidle: using governor menu [ 0.250994] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200 [ 0.260140] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output [ 0.268981] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200 [ 0.288848] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.296229] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.306264] cryptd: max_cpu_qlen set to 1000 [ 0.473767] raid6: int64x8 gen() 698 MB/s [ 0.643861] raid6: int64x8 xor() 432 MB/s [ 0.813989] raid6: int64x4 gen() 988 MB/s [ 0.984079] raid6: int64x4 xor() 509 MB/s [ 1.154207] raid6: int64x2 gen() 911 MB/s [ 1.324295] raid6: int64x2 xor() 535 MB/s [ 1.494450] raid6: int64x1 gen() 829 MB/s [ 1.664527] raid6: int64x1 xor() 452 MB/s [ 1.669224] raid6: using algorithm int64x4 gen() 988 MB/s [ 1.675175] raid6: .... xor() 509 MB/s, rmw enabled [ 1.680544] raid6: using intx1 recovery algorithm [ 1.686257] vgaarb: loaded [ 1.689498] SCSI subsystem initialized [ 1.693800] usbcore: registered new interface driver usbfs [ 1.699902] usbcore: registered new interface driver hub [ 1.705775] usbcore: registered new device driver usb [ 1.711580] mc: Linux media interface: v0.10 [ 1.716300] videodev: Linux video capture interface: v2.00 [ 1.722410] pps_core: LinuxPPS API ver. 1 registered [ 1.727872] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.737949] PTP clock support registered [ 1.742455] Advanced Linux Sound Architecture Driver Initialized. [ 1.749761] NetLabel: Initializing [ 1.753505] NetLabel: domain hash size = 128 [ 1.758295] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.764585] NetLabel: unlabeled traffic allowed by default [ 1.771129] clocksource: Switched to clocksource riscv_clocksource [ 1.826790] AppArmor: AppArmor Filesystem Enabled [ 1.839731] NET: Registered PF_INET protocol family [ 1.846140] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.860125] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear) [ 1.869868] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.879449] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.889961] TCP: Hash tables configured (established 65536 bind 65536) [ 1.898060] MPTCP token hash table entries: 8192 (order: 6, 393216 bytes, linear) [ 1.906671] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 1.914629] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 1.924074] RPC: Registered named UNIX socket transport module. [ 1.930602] RPC: Registered udp transport module. [ 1.935795] RPC: Registered tcp transport module. [ 1.940969] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.948068] NET: Registered PF_XDP protocol family [ 1.953359] PCI: CLS 0 bytes, default 64 [ 1.958039] Unpacking initramfs... [ 1.958938] Initialise system trusted keyrings [ 1.966904] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.979996] zbud: loaded [ 1.984768] NFS: Registering the id_resolver key type [ 1.990364] Key type id_resolver registered [ 1.995019] Key type id_legacy registered [ 1.999566] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.006990] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.015232] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 2.022781] fuse: init (API version 7.34) [ 2.066309] NET: Registered PF_ALG protocol family [ 2.071641] xor: measuring software checksum speed [ 2.081937] 8regs : 1979 MB/sec [ 2.091750] 8regs_prefetch : 1976 MB/sec [ 2.100459] 32regs : 2525 MB/sec [ 2.109188] 32regs_prefetch : 2525 MB/sec [ 2.114013] xor: using function: 32regs_prefetch (2525 MB/sec) [ 2.120464] Key type asymmetric registered [ 2.125032] Asymmetric key parser 'x509' registered [ 2.130552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.139487] io scheduler mq-deadline registered [ 2.144686] io scheduler kyber registered [ 2.145927] Freeing initrd memory: 8952K [ 3.432863] start plist test [ 3.438397] end plist test [ 3.533616] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully. [ 3.544649] L2CACHE: DataError @ 0x00000000.08040140 [ 3.550168] L2CACHE: DataFail @ 0x00000000.08040074 [ 3.555634] L2CACHE: No. of Banks in the cache: 8 [ 3.560818] L2CACHE: No. of ways per bank: 16 [ 3.565638] L2CACHE: Sets per bank: 256 [ 3.569866] L2CACHE: Bytes per cache block: 64 [ 3.574780] L2CACHE: Index of the largest way enabled: 15 [ 3.580944] jh7110-pmu 17030000.power-controller: registered 8 power domains [ 3.645261] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 3.655719] @@#########################@@ [ 3.697435] @@ dev ptr:ffffffe0c06bd800/1500/1 [ 3.702620] PVR_K: 1: Read BVNC 36.50.54.182 from HW device registers [ 3.709873] PVR_K: 1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system [ 3.719961] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0 [ 3.739142] loop: module loaded [ 3.745006] spi-nor spi0.0: gd25lq128d (16384 Kbytes) [ 3.765723] 3 fixed-partitions partitions found on MTD device 13010000.spi.0 [ 3.773531] Creating 3 MTD partitions on "13010000.spi.0": [ 3.779589] 0x000000000000-0x000000020000 : "spl" [ 3.786712] 0x000000100000-0x000000400000 : "uboot" [ 3.793852] 0x000000f00000-0x000001000000 : "data" [ 3.802051] libphy: Fixed MDIO Bus: probed [ 3.806828] CAN device driver interface [ 3.811599] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. [ 3.823005] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52 [ 3.831281] starfive-eth-plat 16030000.ethernet: DWMAC4/5 [ 3.837329] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported [ 3.845970] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported [ 3.854610] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported [ 3.862161] starfive-eth-plat 16030000.ethernet: TSO supported [ 3.868592] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.877829] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1) [ 3.885606] starfive-eth-plat 16030000.ethernet: TSO feature enabled [ 3.892614] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width [ 4.148845] libphy: stmmac: probed [ 4.152650] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 4.163596] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 4.175796] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. [ 4.187230] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52 [ 4.195521] starfive-eth-plat 16040000.ethernet: DWMAC4/5 [ 4.201585] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported [ 4.210214] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported [ 4.218859] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported [ 4.226417] starfive-eth-plat 16040000.ethernet: TSO supported [ 4.232868] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 4.242100] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1) [ 4.249863] starfive-eth-plat 16040000.ethernet: TSO feature enabled [ 4.256877] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width [ 4.512631] libphy: stmmac: probed [ 4.516405] YT8531 Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL) [ 4.527364] YT8531 Gigabit Ethernet stmmac-1:01: attached PHY driver (mii_bus:phy_addr=stmmac-1:01, irq=POLL) [ 4.541885] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success [ 4.550158] usbcore: registered new interface driver uas [ 4.556092] usbcore: registered new interface driver usb-storage [ 4.581567] starfive-rtc 17040000.rtc: registered as rtc0 [ 4.587533] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200) [ 4.597584] i2c_dev: i2c /dev entries driver [ 4.603713] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500) [ 4.613656] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to get regulator for cpu! [ 4.622796] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to init starfive cpu dvfs info [ 4.632956] sdhci: Secure Digital Host Controller Interface driver [ 4.639779] sdhci: Copyright(c) Pierre Ossman [ 4.644630] Synopsys Designware Multimedia Card Interface Driver [ 4.651583] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.658601] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel [ 4.667745] jh7110-sec 16000000.crypto: Cannot initial dma chan [ 4.674567] usbcore: registered new interface driver usbhid [ 4.680717] usbhid: USB HID core driver [ 4.685169] riscv-pmu-sbi: SBI PMU extension is available [ 4.691157] riscv-pmu-sbi: 15 firmware and 4 hardware counters [ 4.697596] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available [ 4.708540] usbcore: registered new interface driver snd-usb-audio [ 4.716855] can: controller area network core [ 4.721886] NET: Registered PF_CAN protocol family [ 4.727179] can: raw protocol [ 4.730450] can: broadcast manager protocol [ 4.735085] can: netlink gateway - max_hops=1 [ 4.740334] 9pnet: Installing 9P2000 support [ 4.745133] Key type dns_resolver registered [ 4.750814] Loading compiled-in X.509 certificates [ 4.759774] Loaded X.509 cert 'Build time autogenerated kernel key: c81f1718a55f7699ef69b841ae324f42c2157e23' [ 4.771021] zswap: loaded using pool lz4/zbud [ 4.777599] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 4.784915] AppArmor: AppArmor sha1 policy hashing enabled [ 4.832226] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs [ 4.841839] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs [ 4.850732] mailbox 13060000.mailbox: Mailbox enabled [ 4.856545] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels [ 4.864448] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels [ 4.874085] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present! [ 4.883260] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23 [ 4.891307] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022 [ 4.901513] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____) [ 4.911664] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz [ 4.923304] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms [ 4.933261] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi [ 4.940727] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00 [ 4.948199] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi [ 4.956937] at24 5-0050: supply vcc not found, using dummy regulator [ 4.964798] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 4.974173] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV [ 4.984322] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV [ 4.994675] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV [ 5.004862] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV [ 5.014331] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl [ 5.022545] imx219 6-0010: supply VANA not found, using dummy regulator [ 5.030002] imx219 6-0010: supply VDIG not found, using dummy regulator [ 5.037372] imx219 6-0010: supply VDDL not found, using dummy regulator [ 5.052184] imx219 6-0010: failed to read chip id 219 [ 5.057970] imx219: probe of 6-0010 failed with error -5 [ 5.066323] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges: [ 5.074087] pcie_plda 2b000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000 [ 5.083044] pcie_plda 2b000000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 [ 5.092041] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001) [ 5.100598] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000) [ 5.109164] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000) [ 5.461262] pcie_plda 2b000000.pcie: Port link up. [ 5.466724] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00 [ 5.473662] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.479717] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff] [ 5.487321] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref] [ 5.495617] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400 [ 5.502267] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref] [ 5.510299] pci 0000:00:00.0: supports D1 D2 [ 5.515019] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.525971] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.534979] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 5.541636] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 5.549203] pci 0000:01:00.0: PME# supported from D0 D3cold [ 5.558818] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 5.566160] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref] [ 5.574633] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref] [ 5.583486] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff] [ 5.590970] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit] [ 5.599063] pci 0000:00:00.0: PCI bridge to [bus 01] [ 5.604548] pci 0000:00:00.0: bridge window [mem 0x30000000-0x300fffff] [ 5.612111] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 5.618352] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 5.624638] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9fe took 12241 usecs [ 5.633028] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.638812] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 5.647394] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 [ 5.657561] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190 [ 5.665642] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.671459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 5.679625] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 5.687377] hub 1-0:1.0: USB hub found [ 5.691588] hub 1-0:1.0: 1 port detected [ 5.697061] hub 2-0:1.0: USB hub found [ 5.701263] hub 2-0:1.0: 4 ports detected [ 5.708412] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges: [ 5.716171] pcie_plda 2c000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000 [ 5.725155] pcie_plda 2c000000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000 [ 5.734140] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001) [ 5.742715] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000) [ 5.751279] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000) [ 5.911176] usb usb2-port2: over-current condition [ 6.011186] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 6.071211] usb usb2-port4: over-current condition [ 6.181424] pcie_plda 2c000000.pcie: Port link down, exit. [ 6.194107] hub 1-1:1.0: USB hub found [ 6.198418] hub 1-1:1.0: 4 ports detected [ 6.201800] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully. [ 6.225699] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully. [ 6.236961] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels [ 6.248058] printk: console [ttyS0] disabled [ 6.273020] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A [ 6.282872] printk: console [ttyS0] enabled [ 6.291690] printk: bootconsole [uart0] disabled [ 6.302007] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter! [ 6.310152] jh7110-vin 19800000.vin_sysctl: stfcamss probe success! [ 6.319145] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode. [ 6.319749] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode. [ 6.326482] dwmmc_starfive 16010000.sdio0: Using internal DMA controller. [ 6.326915] jh7110-sec 16000000.crypto: will run requests pump with realtime priority [ 6.330397] jh7110-sec 16000000.crypto: Initialized [ 6.331554] starfive-i2s 120b0000.i2stx_4ch0: designware: play supported [ 6.331564] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported [ 6.331752] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin [ 6.331762] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445 [ 6.331900] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO [ 6.331921] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator [ 6.332236] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end [ 6.332434] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000 [ 6.332700] cdns-dsi 295d0000.mipi: starfive dsi bind end [ 6.333773] dwmmc_starfive 16020000.sdio1: Using internal DMA controller. [ 6.335095] of_cfs_init [ 6.335151] of_cfs_init: OK [ 6.335686] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493 [ 6.340559] dwmmc_starfive 16010000.sdio0: Version ID is 290a [ 6.348428] dwmmc_starfive 16020000.sdio1: Version ID is 290a [ 6.353371] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo [ 6.360169] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo [ 6.368037] mmc_host mmc0: card is non-removable. [ 6.374354] mmc_host mmc1: card is polling. [ 6.601257] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248) [ 6.691186] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248) [ 6.919326] starfive soc:display-subsystem: bound 29400000.dc8200 (ops dc_component_ops) [ 6.927622] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin [ 6.936422] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success [ 6.946998] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done. [ 6.953781] innohdmi-starfive 29590000.hdmi: inno hdmi bind end [ 6.959820] starfive soc:display-subsystem: bound 29590000.hdmi (ops inno_hdmi_ops) [ 6.967627] vs-simple-encoder soc:dsi-output: encoder_bind begin [ 6.973849] no panel, -517 [ 6.976651] vs-simple-encoder soc:dsi-output: encoder_bind error [ 6.982783] starfive soc:display-subsystem: bound soc:dsi-output (ops encoder_component_ops) [ 6.993224] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1 [ 7.001680] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes [ 7.009283] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes [ 7.016634] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes [ 7.033625] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2) [ 7.043497] random: fast init done [ 7.046948] mmc1: new high speed SDXC card at address aaaa [ 7.051142] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330) [ 7.053829] mmcblk1: mmc1:aaaa SC128 119 GiB [ 7.078719] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 7.086153] GPT:32767999 != 249737215 [ 7.089819] GPT:Alternate GPT header not at the end of the disk. [ 7.095841] GPT:32767999 != 249737215 [ 7.099508] GPT: Use GNU Parted to correct GPT errors. [ 7.104693] mmcblk1: p1 p2 p3 [ 7.501247] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495) [ 7.951245] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990) [ 9.061214] ALSA device list: [ 9.064234] #0: Starfive-PWMDAC-Sound-Card [ 9.068560] #1: Starfive-HDMI-Sound-Card [ 9.077792] Freeing unused kernel image (initmem) memory: 2272K [ 9.084088] Run /init as init process [ 9.087804] with arguments: [ 9.087819] /init [ 9.087832] with environment: [ 9.087847] HOME=/ [ 9.087860] TERM=linux [ 9.087874] stmmaceth=chain_mode:1 [ 9.931835] BTRFS: device fsid 30298d7f-ef78-4f71-8a60-cb156a82dcb1 devid 1 transid 143 /dev/mmcblk1p3 scanned by mount (179) [ 9.947097] BTRFS info (device mmcblk1p3): flagging fs with big metadata feature [ 9.954529] BTRFS info (device mmcblk1p3): turning on async discard [ 9.960808] BTRFS info (device mmcblk1p3): use lzo compression, level 0 [ 9.967457] BTRFS info (device mmcblk1p3): using free space tree [ 9.973482] BTRFS info (device mmcblk1p3): has skinny extents [ 10.004312] BTRFS info (device mmcblk1p3): enabling ssd optimizations [ 10.851544] systemd[1]: System time before build time, advancing clock. [ 11.396658] NET: Registered PF_INET6 protocol family [ 11.448868] Segment Routing with IPv6 [ 11.452595] RPL Segment Routing with IPv6 [ 11.456668] In-situ OAM (IOAM) with IPv6 [ 11.483958] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 11.489811] systemd[1]: Inserted module 'unix' [ 11.692610] systemd[1]: systemd 252.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 11.725205] systemd[1]: Detected architecture riscv64. [ 12.036966] systemd[1]: bpf-lsm: Failed to load BPF object: No such process [ 12.362164] random: zram-generator: uninitialized urandom read (16 bytes read) [ 16.781153] random: crng init done [ 16.837620] zram: Added device: zram0 [ 17.138682] systemd[1]: Queued start job for default target Graphical Interface. [ 17.150894] systemd[1]: Created slice Slice /system/getty. [ 17.195191] systemd[1]: Created slice Slice /system/modprobe. [ 17.235478] systemd[1]: Created slice Slice /system/serial-getty. [ 17.273352] systemd[1]: Created slice Slice /system/systemd-fsck. [ 17.315402] systemd[1]: Created slice Slice /system/systemd-zram-setup. [ 17.352763] systemd[1]: Created slice User and Session Slice. [ 17.392155] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 17.431632] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 17.472141] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 17.511809] systemd[1]: Reached target Local Encrypted Volumes. [ 17.551389] systemd[1]: Reached target Local Integrity Protected Volumes. [ 17.591725] systemd[1]: Reached target Path Units. [ 17.631359] systemd[1]: Reached target Remote File Systems. [ 17.671317] systemd[1]: Reached target Slice Units. [ 17.701771] systemd[1]: Reached target Local Verity Protected Volumes. [ 17.741678] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 17.796226] systemd[1]: Listening on Process Core Dump Socket. [ 17.832132] systemd[1]: Listening on Journal Audit Socket. [ 17.872783] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.912516] systemd[1]: Listening on Journal Socket. [ 17.958600] systemd[1]: Listening on udev Control Socket. [ 17.991841] systemd[1]: Listening on udev Kernel Socket. [ 18.041072] systemd[1]: Mounting Huge Pages File System... [ 18.086055] systemd[1]: Mounting POSIX Message Queue File System... [ 18.126317] systemd[1]: Mounting Kernel Debug File System... [ 18.163826] systemd[1]: Mounting Kernel Trace File System... [ 18.206701] systemd[1]: Starting Load AppArmor profiles... [ 18.244700] systemd[1]: Starting Create List of Static Device Nodes... [ 18.287590] systemd[1]: Starting Load Kernel Module configfs... [ 18.324796] systemd[1]: Starting Load Kernel Module drm... [ 18.364720] systemd[1]: Starting Load Kernel Module fuse... [ 18.402292] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 18.429392] systemd[1]: Starting Journal Service... [ 18.441997] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 18.455171] systemd[1]: Starting Remount Root and Kernel File Systems... [ 18.491656] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. [ 18.514879] systemd[1]: Starting Apply Kernel Variables... [ 18.535393] systemd[1]: Starting Coldplug All udev Devices... [ 18.589758] systemd[1]: Mounted Huge Pages File System. [ 18.651809] systemd[1]: Mounted POSIX Message Queue File System. [ 18.652705] audit: type=1400 audit(1675157657.790:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=259 comm="apparmor_parser" [ 18.673276] audit: type=1400 audit(1675157657.790:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=259 comm="apparmor_parser" [ 18.751723] systemd[1]: Started Journal Service. [ 18.780929] audit: type=1400 audit(1675157657.910:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=258 comm="apparmor_parser" [ 18.796006] audit: type=1400 audit(1675157657.920:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=257 comm="apparmor_parser" [ 18.810488] audit: type=1130 audit(1675157657.930:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.896100] audit: type=1400 audit(1675157658.020:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=271 comm="apparmor_parser" [ 18.911073] audit: type=1300 audit(1675157658.020:7): arch=c00000f3 syscall=64 success=yes exit=39785 a0=5 a1=2ac5452490 a2=9b69 a3=0 items=0 ppid=254 pid=271 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/bin/apparmor_parser" subj==unconfined key=(null) [ 18.981274] audit: type=1327 audit(1675157658.020:7): proctitle=2F7362696E2F61707061726D6F725F706172736572002D2D7265706C616365002D2D002F6574632F61707061726D6F722E64 [ 18.996069] audit: type=1130 audit(1675157658.110:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.031270] audit: type=1400 audit(1675157658.160:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=260 comm="apparmor_parser" [ 19.422778] BTRFS info (device mmcblk1p3): using free space tree [ 19.537358] systemd-journald[256]: Received client request to flush runtime journal. [ 19.571663] systemd-journald[256]: File /var/log/journal/3d7c30bf6b8c4473ac5c4b58ccf9ab2b/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 20.709570] starfive-eth-plat 16040000.ethernet end1: renamed from eth1 [ 20.773403] starfive-eth-plat 16030000.ethernet end0: renamed from eth0 [ 21.323265] jpu: loading out-of-tree module taints kernel. [ 21.323476] Error: Driver 'imx219' is already registered, aborting... [ 21.329938] cnm_jpu 13090000.jpu: init device. [ 21.345482] vdec 130a0000.vpu_dec: device init. [ 21.348682] SUCCESS alloc_chrdev_region [ 21.350043] SUCCESS alloc_chrdev_region [ 21.465004] mailbox_test soc:mailbox_client@0: invalid resource [ 21.470972] mailbox_test soc:mailbox_client@0: invalid resource [ 21.477071] mailbox_test soc:mailbox_client@0: Successfully registered [ 22.630425] zram0: detected capacity change from 0 to 8094720 [ 22.894309] Adding 4047356k swap on /dev/zram0. Priority:100 extents:1 across:4047356k SSDscFS [ 26.102861] starfive-eth-plat 16030000.ethernet end0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL) [ 26.131400] starfive-eth-plat 16030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 26.149716] dwmac4: Master AXI performs fixed burst length [ 26.155253] starfive-eth-plat 16030000.ethernet end0: No Safety Features support found [ 26.163212] starfive-eth-plat 16030000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported [ 26.191146] starfive-eth-plat 16030000.ethernet end0: registered PTP clock [ 26.211126] starfive-eth-plat 16030000.ethernet end0: configuring for phy/rgmii-id link mode [ 26.252463] starfive-eth-plat 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL) [ 26.281248] starfive-eth-plat 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 26.289526] dwmac4: Master AXI performs fixed burst length [ 26.295056] starfive-eth-plat 16040000.ethernet end1: No Safety Features support found [ 26.303003] starfive-eth-plat 16040000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported [ 26.341229] starfive-eth-plat 16040000.ethernet end1: registered PTP clock [ 26.348455] starfive-eth-plat 16040000.ethernet end1: configuring for phy/rgmii-id link mode [ 29.465032] starfive-eth-plat 16040000.ethernet end1: Link is Up - 1Gbps/Full - flow control off [ 29.473878] IPv6: ADDRCONF(NETDEV_CHANGE): end1: link becomes ready [ 29.519199] NET: Registered PF_PACKET protocol family [ 37.061433] mipi_0p9: disabling